So We've Had This Coffee Table A Few Years Now And Have Been Wanting To Transform It Into An Ottoman, So That's What We're Doing Today!

Web grab 2 legs and 2 short side pieces. Web how to create a diy coffee table ottoman either cut or have lowes or home depot cut your plywood to your dimensions lay the top piece down on the side that you want to be the top, so the top is laying on your flat working surface grab one of the smaller pieces that will be used as the sides/legs to mark for the corner braces add wood. The new dimensions of my ottoman top are 39”x39,” the foam adds an extra 4 inches of height on each side, and i wanted at least 2 inches of excess fabric on each side to tuck under the table top.

Web Diy Network 164K Subscribers Subscribe 20K Views 5 Years Ago Transform A Coffee Table Into A Plush Ottoman With These Simple Steps.

This is where you’ll line the bottom of the short side piece up with. But we wanted one, so i had to figure out how to do it on the cheap. 2×4 wood (optional) power drill wood screws (or deck screws to avoid drilling.

Figure Out Your Fabric Needs.

Either way, making your own diy ottoman is a great way to. Repeat with the other set of legs and short side pieces. Measure 3” from the bottom of the legs.

Vintage Makeovers And Upcycled Seating.

That meant that my fabric needed to be at least 51”x51”. Web this is an easy diy project on how to make a tufted coffee table ottoman than can also be used as a tufted bench. Using glue and 2.5” kreg screws, install one short piece 3” from the bottom of the legs and one flush with the top.