Five Coats Of General Finishes Water Based Hp Satin Were Foam Brushed On All Surfaces With Sanding On The Top And Bottom Surfaces In Between Dry.

The dimensions of this slab table are 55l x 23w x 1.625h and weighs a little over 47 lbs. Web build your own live edge coffee table with this easy to follow diy. Measuring tape, electric sander, drill, paintbrush difficulty level:

Charlestoncrafted Check Instructions Here Materials:

( photo below shows table leg) if you plan on buying legs to simply attach to your slab that’ll save you a lot of time. Diy live edge coffee table image credit: I was worried the knots would make it hard to work with but, i didn’t have issues at all.

Flatten The Slab First Thing I Had To Do Was Flatten The Slab.

Web use as many pyramids to deflect the weight evenly across the length and width of your board. You could probably even get. This can be done so many different ways, but for this particular slab, i used a combination of a sander and a router with a sled (i used my friend brandon’s tutorial to make my sled )!

Live Edge Wood Slab, Screws, Hairpin Legs, Polyethylene Tools:

110mm away from each end and 90mm away from each side edge. Easy this diy live edge coffee table is a perfect, straightforward plan for making a lovely live edge table. Web then with the table top upside down i placed the legs over it, also upside down and using a tape measure centred the legs on the slab.

Web To Build A Live Edge Table Yourself, You’ll Need The Following Tools And Materials.

With the legs positioned i could mark the hole locations on the underneath of the slab using a long thin pointed rod that passed through the holes, like a.