We Already Had One Little Ikea Bookshelf Attached To The Wall So I Kind Of Wanted To Tuck The Bookcase Into The Corner Beside It Which Meant Fitting It Between A Wall And A Radiator.

Run a ¼” roundover bit over the top of one of your 1×3’s. Choosing the right cardboard can reduce a lot of work. Repeat step 4 with the other side piece, creating a rectangular frame.

Run A ¼” Roundover Bit Over The Top Of Each Of Your 1×8 Risers.

Drill pocket holes into 6 of your 1x3s. Cut all your wood down to size. Decide where your bookshelves will go.

The Final Sizes Of Our Bookshelf Are 125Cm L X 32Cm W X 90Cm H, And The Pdf Plan Is In Centimeters.

The first thing i did was measure the space where i wanted my bookshelves to go. It allows them to see all of their books and pick which one they want to read! You need a base ( 60 x 40 x 15 cm), 3 shelves ( 60 x 20 x 10) and 2 base boxes to raise the shelf levels.

Secure The Pieces Together With Screws.

I tried to keep things simple and, except for the two sides, all the panels can be obtained with a few straight cuts from a single plywood panel (cut plans are from www.cutlistoptimizer.com ). I put in four and spaced them out 4” from each end, then 17” from each end. Plan and design i designed the bookshelf in fusion 360 inspired by existing designs i found on the internet.

Web Apply Wood Glue Along The Top And Bottom Edges Of The Side Piece.

If you’d like to try and build your own bookshelf, you can begin by downloading our plans, for free. Customize it for your kids by painting or staining it to match your playroom decor! Web download free pdf plans.